top of page
hand-plane-shaves.jpg

Sharp Chisels Set

Set of bevel edge chisels in canvas tool roll

  • Sturdy canvas roll is stitched to hold 5 bench chisels with additional space that can be used e.g. for a marking knife or a carving tool. Edges of the roll are sewn with ​polyester banding to prevent fraying. A ​long tie firmly closes the roll to prevent the tools from slipping out.

  • Inovated chisel with improved cross-section of the blade that minizes friction when cutting into wood. Improved grinding of the edges creates expecially thin sides which are in particular needed in dovetailing.

  • Ergonomic handle from hard and hefty hornbeam wood is strong enough to withstand heavy mallet blows. Combination of the stained hornbeam handle, brass ferrule and improved grinding of the blade creates a unique design of the tool.

​

  • BladeHandle forged from highly alloyed Cr-Mn steel

  • heat treated up to 59 HRc

  • thin sides for sidewall clearance

  • ergonomic with round cross-section

  • stained hornbeam wood

  • brass ferrule

Narex Set of chisels_edited.jpg
Narex sharpening jig_edited.jpg

Honing Guide

  • This Narex honing guide is designed to sharpen plane irons, wood chisels & skew chisels.

  • Featuring an extruded aluminium clamp and a solid brass roller this honing guide delivers accurate results and will produce the finest micro bevels.

  • Honing guide 117 x 66 x 57 mm.

Norton waterstone 1000_4000_edited.jpg

Norton Waterstone 1000/4000 grit

  • The Norton 24450 Japanese-style 1000/4000-grit combination waterstone creates an abrasive slurry for effective sharpening, with 1000 grit on one face for establishing a cutting edge, and 4000 grit on the opposite face for maintaining and refining cutting edges; this 1 x 8 x 3 inch (H x W x D) stone, suitable for bench use, cleans up easily with water, and comes encased in a blue plastic hinged box. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The box protects the waterstone and provides a reservoir to keep it moist. The removable box lid, with no-slip rubber feet, acts as a sharpening station to hold the waterstone in place during bench use.

  • This synthetic waterstone is created by grading abrasive material to a consistent particle size and blending it with bonding agents. It is then molded and surface-finished. Waterstones have a finer grit and softer bond than oilstones, and use water as the lubricant to develop a slurry, a thin paste of abrasive grains and water that removes metal with less pressure than an oilstone requires. Cleanup is easier than with oil as lubricant. The use of waterstones originated in Japan, where such stones occur naturally. As a result, some synthetic waterstones may be called “Japanese-style.” However, whether natural or synthetic, and whether labeled “Japanese-style,” all waterstones have the same basic characteristics. This stone conforms to the Japanese Industrial Standard (JIS) for waterstones.

  • Sharpening stones, or whetstones, are abrasive surfaces used to sharpen and hone the edges of steel cutting implements such as chisels, knives, scissors, hand scrapers, and plane blades. Sharpening is the process of creating or re-establishing a cutting edge by grinding away portions of the metal to adjust the angle of the edge and reform the shape. Honing removes small imperfections. Stones can be flat, for working flat edges, or shaped, for edges that are more complex. Sharpening stones are made of natural or synthetic materials that range from softer to harder, and are categorized by the size of their abrasive particles, known as grit. A stone with a coarser grit is used when more metal needs to be removed (e.g., when sharpening a nicked or very dull blade); the stone with the finest grit produces the sharpest edge. Where numbers are assigned to specify grit, they range from coarser grit (low) to finer grit (high). Some sharpening stones are designed for use with a lubricating liquid, some can be used dry, and others can be used either wet or dry. When used with lubricating liquid, a sharpening stone can be called a waterstone or an oilstone, based on the lubricant required.

  • Norton Abrasives manufactures sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. Norton, now a brand of Saint-Gobain, meets ISO 9000 and 14001 certification for quality and environmental management standards.

Norton waterstone 1000_8000_edited.jpg

The Norton 1000/8000 Waterstone is a must-have stone for woodworkers, knife enthusiasts and straight razor users.


The Norton 1000/8000 grit sharpening stone combines craftsmanship with the latest technology to produce a superior sharpening stone.


This Norton sharpening stone is an excellent choice where speed and a razor-sharp edge are desired.


Woodworkers, straight razor users and great chefs have trusted Norton quality for over 150 years. You too can depend on Norton Water Stones to meet all your sharpening needs.

Multifunctional Case and Complete User Guide Included.

bottom of page